Monday, February 29, 2016

French daybed debuts in the dining room


 Spring is coming, and I can't wait to get back outside.  Last year we
created a French style courtyard in the back of the house. Part of our 
plan was to access it by adding French doors in the dining room
 that will lead directly to the small narrow gravel courtyard.  We got the doors 
completed, leaving me to dream about how we will enjoy the courtyard as
soon as spring arrives.  When I spotted an antique French daybed at SOWA, our local
Boston vintage market, I decided it would be the perfect accent for the courtyard.
But for now the daybed is sitting in my dining room, and I figured I could just
 work around it if I made it look like it really belongs in this room.  So, here it is!
At the end of this post you can visit my design blogger friends who have 
all joined my in an ode to Spring, and see what they have done to usher in the season.
But make sure you check out my table, as I have been working on that too.
 A pretty table setting for Easter was one of the purposes of a recent photo shoot. 
 The table has my purple transferware dishes holding center court.  
Silver baby cups hold purple Easter grass and a few luxury chocolates for
 our grown up boys.  It is a new tradition for our Easter table, 
and it's a sweet nod to Easter when it once was all about the basket.
Vintage lilac colored damask napkins are folded inside of amethyst colored footed cups,
then set on top of the Clarice Cliff purple transferware plates.
White tulips reinforce the coming season so that this pretty dining room
 is all set for spring... even with the new unexpected addition. 
 Its a dreamy combination I think, a day bed in a dining room!
 For this dining room shoot, I moved in the piano bench and I think it might just be staying. 
 The slipcovered linen bench looks really pretty tucked under the table, 
which makes space for the daybed.
 The photo shoot I was talking about earlier, was actually a video shoot with 
Matthew Mead for our Decorating Channel on Youtube.  
We shot a video tour of my living room and I explain why I love it so....
from the newly painted blue walls, to the painted piano,
 to the antique Italian hand painted floral tea table,
 to my opaline chandelier and the romantic mantle I created using appliques....
well I LOVE it all!!
If you want to check it out you will see it all too. 
Seeing a room on video is very different than looking at photos.
 It comes to LIFE!
Visit my Living Room tour on our DECORATE channel by clicking HERE.
One more thing...!
Today I'm joining in with some very talented design bloggers 
to bring you some ideas to jump start your spring style! 
Please visit them all for lots of beauty and inspiration.


 photo signature_zpsxi5q1w6r.png

Read more »

Friday, February 26, 2016

Video shoot and a living room tour


Look at my dog Colby!! 
He is growing and is so fun to have around...
look at him posing on the sofa.  Last night something funny happened.  For four months he has been sleeping on our bed.  For the last two nights he kept jumping off the bed during the night, acting restless and hubs and I weren't getting any sleep.  So last night hubs brought up Colby's dog bed and plopped it on our bedroom floor.  Colby climbed in and slept the entire night without making a peep (well he does snore).  So here we were shocked!! We thought dogs LOVE sleeping on people beds and feel privileged to do so...but our boy wants his own big boy bed apparently.
That was a mind blower, but we all slept fantastically!!! 
Anyway, let me tell you the latest:
 This week I prepared for a series of videos that Matthew Mead and I planned to 
shoot at my house.  We try to shoot at least six videos on all kinds of topics, like
decorating, floral arrangements and book reviews.  This time we added a new 
category which I think we will be doing regularly, which is just talking about stuff.
Random stuff, but the discussion will revolve around design and decorating.  For example
we talked about our connections with Martha.  Yeah, that Martha.  Martha Stewart.
You won't want to miss that video convo!  When it is all edited I will load it onto
our DECORATE channel and you can watch it with a click of the finger.
 We also decided to add some mini house touring, 
and we filmed my living room and dining room.Its fun to see it live 
and in video format,  rather than a carefully stage photo.  
This way you really get a feel for the room and see how the house is laid out.  
Matthew is filming me talking about my living room.  And how did we get this pic?  
 It was taken by Julia Sullivan, formerly my go to gal at my shop Maison Decor, 
she is now doing most of our videography for our segments. 
 Matthew and Julia posed in front of this darling woodland centerpiece
 we created, and that was also one of the segments we filmed for our channel.
 So I hope you will get a chance to visit our DECORATE channel, 
and if you want to come inside and "walk" around with us, click on the link! 
 I will be busy blabbing away about the various things in the room, 
like my hand painted table that many of my readers love, 
and might have thought I sold since it is no longer front and center as my coffee table.
This big rustic trunk has taken its place...
and you know with me, I am always decorating and that means painting,
 rearranging and adding little touches. 
 Next time I blog, I will be showing off some spring touches
 in the dining room, and a new addition!

Visit our DECORATE channel and see my mini house tour by CLICKING HERE
 photo signature_zpsxi5q1w6r.png
Read more »

Tuesday, February 23, 2016

Photo Shoots and Farmhouse Mirrors

 Love love love these Woodlawn blue walls...I am so happy with the color.
With every day I grow to like it more and more, which is a good thing.
With paint it can be a bit nerve wracking to pick a color and then discover
it really isn't what you had in mind after all.  So with that, I started thinking of 
perhaps painting the dining room walls.  But I really love the simplicity
of how the room feels, so I am not sure I am ready to pull the paint trigger just yet.
 I was considering painting the doors, and maybe that is all I would need for awhile.  
One thing that I will be changing is the mirror in the room.  I found an amazing mirror
at AntiqueFarmhouse.com and it is going to make a huge difference in here.  
 This is the mirror I fell in love with, and it is four feet long and three feet wide.  
A statement piece for sure!  I think it will convey more of the french farmhouse
look in the dining room that I am going for....
When Antique Farmhouse asked if I wanted to work with them, how could I resist?
They have loads of rustic, cottage, farmhouse style accessories,
 from large to small items that can finish off your space,
which is exactly what I am hoping this beautiful mirror will do for my dining room.
 The reason why I am extra motivated right now to get all of my rooms 
looking extra pretty is because Fifi O'Neill is coming to shoot my home this spring!
Here she is looking through the camera lens at a shoot last year at My Desert Cottage.
Fifi and interiors photographer,  Mark Lohman will be doing their thing at my house!!
So all of the projects I planned to do this year at a leisurely pace, will now have to get done
just a bit more quickly!  
 Fifi is the author of books, like this one that is one of my faves, and 
she is also the editor of several magazines, so I am not sure where my house 
will be featured quite yet.  All I do know, is I want it to look the way I imagine it can look, 
which in my mind is pretty amazing (hahah) I just have to finish my projects....
 Like this one, with the help of Mr. Maison Decor, I scored on this antique French daybed 
with the makers mark still welded to the frame.  I have to make a mattress and
 cushions and pillows and all that stuff.  I imagine it sitting outside in the French courtyard 
I created last year, which is almost finished, but not quite.
 So while its still winter time, my mind is firmly planted in spring, 
where photo shoots will be taking place, and things will be painted and new mirrors 
will be hung, creating my vision of that french style home I aspire to create.
(source unknown)
So for now, this dream is still a dream...
but I am getting one step closer, one step at a time.


 photo signature_zpsxi5q1w6r.png
Note: This is a partially sponsored post by Antique Farmhouse.com.  All thoughts and opinions are my own. 
Read more »

Monday, February 22, 2016

Behind the Blog Feature on Maison Decor


 An online site for Home Decor Enthusiasts, Deco & Bloom has something for everyone.
Like reading an online magazine, you can find articles on great designers, room interiors, focus articles on paint colors or kitchens or baths....and then there is a section where they feature the names behind the brands we love, and the blogs we read.  They asked me if they could feature Maison Decor, "Behind the Blog" as part of their very interesting series where they interview the bloggers with well crafted questions. The answer was yes, I would be honored to be featured on your very cool website.   The questions they sent me to answer proved to be very interesting for me, and I think you will learn more than just a little bit on how this blog started, my design philosophy, 
and what makes my world go around. 
Even my husband and kids found things they didn't know in this interview. Really.
 Love their logo too.  
So, I hope you enjoy this feature on my blog, and how it came to be, and what my plans
are for it and myself in the future.  I was delighted to see that all three of my dogs made
the cut from their graphic designers studio!  I loved seeing Dillon and Tobey last Easter
chilling on the couch.  And of course, little Colby made the headlines, 
which tells me that I am not the only one who thinks dogs make a home (and a blog) a better place.
Click HERE to read my feature, and then poke around the other articles, as you
might just want to bookmark this awesome website for future reading.

 photo signature_zpsxi5q1w6r.png
Read more »

Wednesday, February 10, 2016

How to Reupholster the Easy Way: My French Chair

Welcome to my tutorial blog post on how I reupholstered this second hand
French Provincial arm chair. I took lots of photos at some points, and less at other
points during the process, but hopefully this tutorial will inspire you to give it a try
and not be intimidated to attempt reupholstering.  I have never tried it before, and when
I scored this chair at an antique/vintage shop, I didn't love the fabric, although there
was nothing wrong with it.  After giving it some thought I didn't see why I couldn't just go
over the existing fabric with the new fabric.  So that was my plan, and the only thing I 
will tell you is that you must buy or rent a pneumatic stapler that gets powered from being 
attached by a curly stretchy cord to a small compressor.  This nailer/stapler will shoot the 
staples into the hardest of wood with barely a squeeze of the trigger.  The staples are tiny
and I used a 3/8" size staple for this project.  A regular stapler will not work.
For fabric, I ordered 7 yards of a toile (note: this was plenty of fabric for both pieces)  which I figured was going to be very easy to use, pattern wise.  Stripes and checks would likely be harder as you have to kind of pay attention to matching the pattern when you put it on the adjoining sections of the chair. This chair would be kind of easy to do because its parts were all like little islands that would have their own pieces of fabrics stapled onto
the independent sections.  So here we go~lets get this thing upholstered!
 Here is the chair, and is shown after I took the seat cushion off of the chair. 
 This is a photo of the compressor and the nail gun. It plugs into any household outlet. You will see Colby in a lot of these photos as he was relentlessly watching and sniffing around as I did the project.
 When I bought the chair, it had never been finished with the cording or trim that would normally have been attached to hide the staples.  This was what really inspired me to think about just stapling more fabric on top of the existing fabric.  See the tiny staples? They are all along the border of the fabric. I will leave them there and just lay some fabric over it and do the same thing.  But I decided to start on a less conspicuous area in case it was harder than I predicted. If you have a chair that you want to do this to that does have the cording or trim covering the staples, then pull it off and remove it using pliers or just pull it off.  Then you will be able to start at the same point that I did on this tutorial.
 I cut a piece of the toile and laid it over the side panel of the chair.  Then I put in a staple at the middle of the top and bottom, and left and right borders to center and anchor the fabric.  Then I just started firing staples in a row a few to the left, a few to the right, a few up and a few down...

 Give yourself a few extra inches of fabric all the way around so you won't be short. This was my first panel that I stapled and one side was very close to the edge, and it was too close to comfort.  I cut the rest of the pieces a bit larger after that.  Here you can see the staple gun nose hitting the fabric.  I can feel the wood border of the chair frame and by running my finger over the fabric, I can feel where to fire in a staple.  
After putting in the staples, which are side by side, you will trim off the excess fabric as close as you
can to the staples themselves. I started off using scissors to trim, but switched to a straight edge razor
to get a close trim job.  
 And just like that, the first panel was done, and it only took about ten minutes! 
 See how the fabric is trimmed very close?  Its a bit ragged looking but this will all be covered with a decorative flat braid called gimp, which will be applied with glue.
 The fabric is nice and smooth and held in place by one million staples on the edges.
 Now that I am feeling confident, I cut a piece of fabric for the center back.  I wanted the toile pattern to be featured on the back, so I cut it out accordingly.  Solid fabrics would be the most simple to do of course.  I fired in a staple at the North South East and West points on the border and then worked out from there. 
Here you can see there are more staples along the sides than there are at the top and the bottom. I did the sides a bit more, next did the top border and then finished the bottom border along the chair frame.
 After all is stapled along the edge of the frame, you trim off the excess with your razor or scissors.  I laid the chair on its back on top of an ottoman so I could work on it with ease.
 I had a few tools on the table, which I didn't need to use often.  A needle nose plier helped pull out any staple that didn't go in all the way, or bounced back leaving a sharp end exposed.  I also had a tiny tack hammer to pound in any staples that didn't go in as far as they should have.  

 I did the small area on top of the arm, which was super fast.  Then I did the inside panel.  See how the fabric is just laid over the arm?  I am deciding where to trim it so get the pattern where I want it.



Then I started stapling the borders.  I recommend putting a staple in at the top and bottom borders to anchor the pattern, and then again on the left and right sides if it applies.  After that you can quickly just start stapling the rest of the border until finished, with your staples side by side.  
 For this area in the "armpit of the chair" where the joint meets and you don't see a wood frame, feel in the area with your fingers to see where the wood frame is hidden in the recess.  Then push your fabric into the crevice, but turn an inch or so back on the fabric (look at next photo) and shoot a staple in there.  Easy peasy! Anything that seems to make sense is probably sensible, so I followed my gut on reupholstering this chair whenever anything wasn't clear as a bell. 
 Some areas that wouldn't have gimp trim will need you to give it a finished edge, and you can do this by simply folding the edge of the fabric underneath before you staple it in place.
 Then continue stapling...
 Then trim off the excess.  See the pink fabric underneath?  Its going to be ok, because that will be hidden with the decorative gimp trim.
 Sometimes I used scissors, sometimes the razor, to trim the fabric.
 Woohoo! Look how fast this thing was getting done!  It really was moving along quickly.
 
I finished all the little panels and now I had to deal with how to upholster the decking area.
The decking is the area that is hidden under the seat cushion, but then there was the part that was upholstered and attached to the frame.  I made a three section piece of fabric to fit this area, and I would say that this was the most difficult part of the project, as it involved the sewing machine and doing some fitting.  I will try to explain it as best I can to you.  I know how to make slipcovers and so the technique here uses some of that know-how.
 Lay the fabric ( I kept mine on the bolt so it wouldn't wrinkle) across the front part of the chair, and in doing so, I knew I could cut a piece straight across that would fit from where the arms join the deck to the front of the chair where the fabric gets attached to the frame.  Each chair will be different and you will have to devise your own home made pattern to how to cover your decking area.
 After cutting a length of fabric, I turned it face down and got my pin cushion and created darts at the right and left hand edges/corners of the chair.  A dart is just making a triangle to take up the extra fabric so you can turn the corner with ease.
 This is a dart.  I pinned from the corners to the edge of the fabric and it got wider as it moved away from the corner.  
 Colby was in the mix all along the way, so if you see Mr. Pumpkin Head chewy toy in my shots, that is why.
 This was the right hand dart I made to fit the fabric to the edge of the chair. 
 Here are both darts pinned.  Just pin up the excess fabric and then repin it if you feel it doesn't seem to fit correctly.  This is something I learned to do in junior high school sewing class making simple clothing, like A-line skirts.  Don't get scared at this part, just try it, and retry it and then check it by flipping it over and putting back over the front of the chair.
I flipped it right side over to see how it would look.  I was seeing if my darts had taken up enough of the fabric to fit snuggly but not too tightly.  Remember we will be stapling the front area and if the darts aren't taking up enough fabric you will have extra fabric to staple, which you want to try to avoid because it can look bunched up. Ok, my fabric fits pretty good, after I did this check, so now I take it off and bring it to my sewing machine and stitch a line right where I put all my pins on the dart.
 This is the stitched up dart. 
 Now cut off the triangle of fabric that was created when you stitched the line.  Leave yourself about 3/8" or 1/2" of fabric so you can iron it out flat.
 Cut the fabric and then make a small cut to the point in between the seam so you can iron it flat.
 I stitched both darts, trimmed them and ironed them and then put the piece back on the chair to see if it fit nicely.  Nice enough!  You can see there is excess fabric on all sides of this piece.  That is good.  All we were trying to do was to get this piece fitted over the front area of the chair. 
 See how it drapes over the "knees" of the chair?  Very good. And see how ragged the top edge of the fabric is now that the darts were added?  I will trim this off in a straight line, and this doesn't have to be perfect.  Just trim it up kind of straight.

 I left it in place, and trimmed it out straight. The sides are still just loose with lots of extra fabric hanging off the sides. Ignore these for now. See the white fabric on the existing decking area that shows the manufacturers label?  Well we are now going to cut a piece of fabric for that area.  You can use a piece of lining or other fabric if you want to save your good fabric, but I am just going to use the same toile fabric as I had plenty of it.
 I cut a large enough rectangle and pinned it to the decking front piece with darts.  Put your fabric right sides together and then pin in place. This piece of fabric you are sewing onto the front edge fabric has to cover the white area you see, plus have enough to tuck into the crevices.
 I flipped back the second piece of fabric that is now pinned in place to the front fabric.  I will only sew the one pinned edge (which is the edge we trimmed straight with our scissors).
 I stitched it at the machine then ironed the seam flat, then brought it back to the chair and laid it in place.  The fabric has plenty to get tucked into crevices on the left and right.
 In the back I will trim it straight across to attach the third piece of our 3 piece decking pattern.  Two down, one to go!! We are almost finished with this part!

The last piece of the three piece pattern will need to be cut to come out through the chair back and get stapled onto the bottom back side of the chair frame.
 This chair has a space on the bottom area.  Assess your chair and then look at where the existing upholstery is stapled, or just folded or stitched.  It is kind of like a blue print for what you have to do to your own chair.  Not all chairs are going to be the same, and remember, this is the FIRST time I have done this.  But fearlessly I plunge ahead, as I can sniff the finish line!! 
 I measure roughly and cut a rectangle of fabric for my third and last piece of the decking area.  Above you can see the seam line where it was stitched and then ironed open in a flat position.  You want to iron all seams because it will lay flatter and look more professional. You can also see the left and the right raw edges of the second piece of our pattern, just laying on the chair.  It is all still getting fitted, nothing has been stapled yet.  We are making the pattern and fitting it before we staple in place.


 After the third piece is attached, I laid it all out and fit it at the "knees" (the front corners where the legs are, by placing the darts over each knee.  Then I took a flat wood spoon (or spatula) and I shoved the fabric through the very small opening so it would fall out over the backside of the bottom of the chair.  That is the area where the third piece of fabric will be covering the upholstery.  
Now the back end of the decking fabric is seen over the bottom area of the chair.
 I fold under the raw edge, about an inch or two to prepare it to be stapled onto the bottom of the back frame. Now move to the front of the decking and start stapling there, saving the rear back part for last.
 The left and right sides of the crevices (the interior upholstery cracks where sides meet the seat) parts of the fabric are still sitting on top of the decking. That is ok.  Lets just start stapling the front along the frame and get the corners stapled around the knees. Then we will deal with crevices after that.

 Staple from the center out a few staples in each direction.  Then move to the right corner and smooth it out and add a staple and do the left side as well.  There will be a little excess fabric at the corners and you will make a nice little fold, one on each side of the knee and staple in place. Watch how to do this part.
 As you come around the front corner, turn the fabric back on itself to create a finished edge, as there are no staples adding along the area where the base of the arm frame meets the front corner.  All you have to do is EXAMINE your chair for staples, and add them where you see the old upholsterer added them. COPY what you see!  I always imagine what the next couple of steps will be, before I add staples, so that way I don't have to pull any out to start over. 
 The fabric above is just folded and laying close as it can to the arm frame. Now I will add my staples to the bottom of the frame, and this folded fabric edge will be held in place by tension.

 The left corner is all stapled in tightly, and you can see there is a little tuck of fabric on each side of the corner/knee area, which is where I took up the excess fabric. (Note that there are no staples on the left folded piece of fabric, and the fabric is held in place nicely without them.)


 See the little pleats around the knee that is created by folding extra fabric and stapling it in place? You will see this a lot in upholstered pieces.  After stapling the bottom, I trimmed off the excess.
 Now I am going to fold under the edges of the crevice fabric pieces and then take my flat wooden spoon and shove it deep into the crevices! Look how good the chair looks already!

 At the very back that third piece of the decking pattern has been pushed out and is dangling off the back.  You can see the gap between the frame.  But the next step is to fold under the edge of each crevice fabric and shove in deeply then anchor with a few staples.
 Look how smoothly the front of the chair is looking!  Don't worry about the raggy threads we can clean it up later when we apply the gimp.


 Colby was really starting to put his foot down...he wanted me to pay attention to him, right when I was trying to finish the decking inside edges.  
So I didn't take a pic of it cuz I had to shove the fabric in with the flat spoon and staple it before he could stop me.  Just insert the fabric in the crevice as tightly and smoothly as you can, and try to have the raw edge turned under when you shove the nail gun deep into the recess of the crevice.
At this point I had to take a break, because someone wasn't happy.
He really wasn't happy.  Enough was enough. Haha.
Anyway, the chair is just about finished. I did the back side and stapled that 
third and last piece of the decking pattern onto the back frame and trimmed it.
For the cushion, I cut out a slipcover style pattern, as most cushions are not upholstered,
as much as they have slipcovers with zippers.  I stitched that up at the end of the day
and then I made a ruffled slipcover for the matching ottoman.  
 The reason I made the slipcover was two fold.  Number one, the ottoman had a cushion attached to the base and I couldn't figure out how to staple it on without taking the entire thing apart, and removing the existing pink fabric. With a slipcover I could just fit it over the shaped ottoman and if I added a ruffle it would still expose the curvy legs.  The second part is that I can launder it if needed, and that is where Colby usually sits when I am on this chair.  I made small pleats along the edge of the ottoman slipcover to give it feminine dressmaker details. 
I will add to this tutorial when I add the gimp, but that won't be for a week or two...
I have to say that reupholstering was way more easy doing it this way, and I think
if you aren't a total perfectionist, you would be thrilled with the results.  By the way, this took me one full day, but I did it in two, because of my puppy Colby. 
I love how it came out, and if you have a chair in good shape, then maybe this method will work for you too.
Oh, and for those interested, the name and brand of the fabric is Covington, Bosphorous, in Flax.  


 photo signature_zpsxi5q1w6r.png
Read more »